This set of replacement seat covers is for the Ford Mach 1 Mustang Sport/GT Coupe, Convertible, & Hatchback with low back standard bucket seats for the 1987-1989 model years. Made with Corinthian grain vinyl Trim with Comfortweave insert and accent stripe. TMI Products include a limited lifetime warranty; cloth products include a 1-year warranty.
These replacement Standard low back bucket seat covers are for the 1987-1989 Ford Mustang Mach 1 Sport/GT Coupe, Convertible and Hatchback models. Manufactured to factory specifications and workmanship.
These replacement covers are the Full Set (Front and Rear) for the Ford Mustang Mach 1 with bucket seats (26" high back seats). Accent stripes are on the front and rear seats
• Standard Upholstery is Corinthian Grain Vinyl Trim w/ Comfortweave Inserts and an Accent Stripe on Both the Front and Rear Seats.
• Full Set includes a total of 8 pieces: 4 pieces for two complete front seats, 2 pieces for one complete rear seat, and 2 pieces for headrest covers.
• Front Only includes a total of 6 pieces: 4 pieces for two complete front seats, and 2 pieces for headrest covers.
• Leather Mach 1 Style Upholstery is available--please email for more information on the upgrade.
• Note: You may reuse your original seat foam with new seat upholstery, however new seat foam is recommended for optimum fit & finish as well as to provide increased side and leg bolsters. Seat Foam is for 1 front bucket only--you must make 2 purchases for complete front set.
| Click on any color swatch or picture below to see a bigger version. | Full Set For Coupe Model | Full Set For Convertible Model | Full Set For Hatchback Model | Front Only For All Models | |
|---|---|---|---|---|---|
|
Black Vinyl with Black Comfortweave Insert and Red Accent Stripe | $ 654.00 Add to cart » | $ 654.00 Add to cart » | $ 654.00 Add to cart » | $ 457.00 Add to cart » |
|
|
Black Vinyl with Black Comfortweave Insert and Black Accent Stripe | $ 654.00 Add to cart » | $ 654.00 Add to cart » | $ 654.00 Add to cart » | $ 457.00 Add to cart » |
|
|
Black Vinyl with Black Comfortweave Insert and Gray Accent Stripe | $ 654.00 Add to cart » | $ 654.00 Add to cart » | $ 654.00 Add to cart » | $ 457.00 Add to cart » |
|
Mach 1 Seat Foam for ONE Seat | $ 161.00 Add to cart » | |||
This Headrest Upholstery is for the 1987-1989 Ford Mustangs with Low Back Bucket Seats and is included with Full AND Front only sets.
• Order this if you only need to replace the Headrest Covers.
• The original upholstery for 1987-1989 Mustang Low-Back seats included Headrest Cover Upholstery, With Welt.
| Click on any color swatch or picture below to see a bigger version. | With Welt All Models | |
|---|---|---|
|
Black Vinyl 958 | $ 42.00 Add to cart » |
This Hog Rings and Hog Ring Pliers Kit is for use when installing replacement seat covers.
• This set of hog rings and hog ring pliers is a kit which is used to install replacement seat covers. If you are a Do-It-Yourself enthusiast, and are replacing seat covers on your vehicle, check to see if hog rings will be required for the job.
• Approximately 100 hog rings are included along with the pliers.
Vic, I wanted to thank you for all your help with my questions, The quality of the covers is excellent, the confusion arose because the original covers had not been made with a foam fabric bonded to the leather. In my mind that makes your covers better than the originals. My trimmer who works for Rolls Royce tells me he has never fitted a better after market seat. Thank you once again
- Stanley M. (UK)
Taking questions about Ford Mustangs, Chrysler Sebrings, and convertible top installation costs.
Read MoreIt may seem a little weird to list the things that we don't sell. (Yes there are obvious things, like fresh fruit etc.) But customers often ask about other products.
Read MoreTaking a look at Mercedes Benz Seat Covers offered by TopsOnline.
Read More
