1971 Ford Mustang (Convertible, Coupe, and Sportsroof) Deluxe Upholstery Seat Covers

These factory style replacement hi-back bucket seat covers are the Full Set (Front and Rear), or Front Only Set, for the 1971 Ford Mustang (Coupe, Convertible, and Sportsroof models). Deluxe Upholstery comes in 2 distinct styles, and this style is made with Corinthian Grain Vinyl Trim with Comfortweave Inserts.

• Front seats are the same for all models and can be purchased separately as well, you can order them separately below.
• The Full Set (Front and Rear) includes a total of 6 pieces: 2 front seat bottoms, 2 front seat backs, 1 rear seat bottom and 1 rear seat back. The Front Only set includes a total of 4 pieces: 2 front seat bottoms and 2 front seat backs.
• This set of replacement seat covers does not include the plastic shell which goes on the back of the front bucket seats. That must be purchased separately.
• Important: Please compare your existing seats with the image we provide here. It is common for Mustang seats to be switched out from one year to the next by restorers; by comparing the image with your actual seats, you can be sure you are getting the right seat covers for your car. Don't see an image? Send us a picture of your seats and we'll help you make the right buying decision.
• Front Bucket Seat Foam Note: We offer front bucket seat foam with and without listing wires. Listing wire is where the upholstery listing channel attaches. Factory original replacement seat foam did not include listing wires (you had to re-use your existing wires or fabricate new wires), so some restorers may opt to order seat foam without listing wires to stay original. However, we offer seat foam with listing wires molded directly into the foam for ease and convenience. We recommend purchasing the foam WITH listing wires.

These factory style replacement hi-back bucket seat covers are the Full Set (Front and Rear), or Front Only Set, for the 1971 Ford Mustang (Coupe, Convertible, and Sportsroof models). Deluxe Upholstery comes in 2 Distinct styles, and this style is made with Corinthian Grain Vinyl Trim with Houndstooth or Tweed Cloth Inserts.

• Front seats are the same for all models and can be purchased separately as well.
• The Full Set (Front and Rear) includes a total of 6 pieces: 2 front seat bottoms, 2 front seat backs, 1 rear seat bottom and 1 rear seat back. The Front Only set includes a total of 4 pieces: 2 front seat bottoms and 2 front seat backs.
• This set of replacement seat covers does not include the plastic shell which goes on the back of the front bucket seats. That must be purchased separately.
• Important: Please compare your existing seats with the image we provide here. It is common for Mustang seats to be switched out from one year to the next by restorers; by comparing the image with your actual seats, you can be sure you are getting the right seat covers for your car. Don't see an image? Send us a picture of your seats and we'll help you make the right buying decision.
• Front Bucket Seat Foam Note: We offer front bucket seat foam with and without listing wires. Listing wire is where the upholstery listing channel attaches. Factory original replacement seat foam did not include listing wires (you had to re-use your existing wires or fabricate new wires), so some restorers may opt to order seat foam without listing wires to stay original. However, we offer seat foam with listing wires molded directly into the foam for ease and convenience. We recommend purchasing the foam WITH listing wires.

These Deluxe Sport Seat replacement hi-back bucket seat covers are the Full Set (Front and Rear), or Front Only Set, for the 1971 Ford Mustang (Coupe, Convertible, and Sportsroof models). This Deluxe Sport Seat Upholstery is made with Corinthian Grain Vinyl Trim with Comfortweave Grain Inserts. Although this is an aftermarket upgrade, this upholstery fits on the factory frame and uses the factory attachment points. New Sport Seat foam is required for a proper fit on the front bucket seats and to provide increased side and leg bolsters.

• Front seats are the same for all models and can be purchased separately below.
• The Full Set (Front and Rear) includes a total of 6 pieces: 2 front seat bottoms, 2 front seat backs, 1 rear seat bottom and 1 rear seat back. The Front Only set includes a total of 4 pieces: 2 front seat bottoms and 2 front seat backs.
• This set of replacement seat covers does not include the plastic shell which goes on the back of the front bucket seats. That must be purchased separately.

These replacement Vinyl Sport R500 Seat Covers are the Full Set (Front and Rear), or Front Only, for the Ford Mustang Coupe, Convertible and Fastback models. It is upholstery used to transform factory Seats into the Sport R500, modern and aggressive style seats. These will fit on standard and deluxe upholstery seat frame. New Sport Seat foam is required for a proper fit on the front bucket seats and provide increased side and leg bolsters.

• Front seats are the same for all models and can be purchased separately as well, you can order them separately below.
• The Full Set (Front and Rear) includes a total of 6 pieces: 2 front seat bottoms, 2 front seat backs, 1 rear seat bottom and 1 rear seat back. The Front Only Set includes a total of 4 pieces: 2 front seat bottoms and 2 front seat backs.
• R500 upholstery sets have the Bolsters, Back and Sides in your choice of OE Vinyl with Black Sierra Grain (slight sheen to vinyl) or Premium Black Vinyl (matte finish to vinyl). Both options feature High-Quality UniSuede Inserts. It also has the running Rally Stripes and Contrast Stitching throughout in a variety of colors.
• This set of replacement seat covers does not include the plastic shell which goes on the back of the front bucket seats. That must be purchased separately.

These replacement Vinyl Sport X Hi-Back Seat Covers are the Full Set (Front and Rear), or Front Only Set, for the 1971 Ford Mustang (Coupe, Convertible and Sportsroof models). It is an upholstery set used to transform factory Seats into the Sport X Hi-Back Style Seats. Front Seat Upholstery will require 2 sets of Front Seat Foams that will fit over your original seat frame and headrests.

• Front seats are the same for all models and can be purchased separately as well, you can order them separately below.
• The Full Set (Front and Rear) includes a total of 6 pieces: 2 front seat bottoms, 2 front seat backs, 1 rear seat bottom and 1 rear seat back. The Front Only set includes a total of 4 pieces: 2 front seat bottoms and 2 front seat backs.
• These Sport X upholstery sets have Vinyl Bolsters with Premium Black Vinyl Back and Sides. It also has Contrast Stitching throughout & the color seen behind the grommets matches the contrast stitching. The grommets are available in stainless steel, brass or satin black.
• Note that these are Sport X Seat Covers, not to be confused with Sport XR Seat Covers. The Sport XR series differs from the Sport X because the XR Seats have Uni-Suede inserts in the bolsters. These Sport X Seat Covers do not have Uni-Suede Inserts.
• This set of replacement seat covers does not include the plastic shell which goes on the back of the front bucket seats. That must be purchased separately.

These replacement Vinyl Sport XR Hi-Back Seat Covers are the Full Set (Front and Rear), or Front Only Set, for the 1971 Ford Mustang (Coupe, Convertible and Sportsroof models). It is an upholstery set used to transform factory Seats into the Sport XR Hi-Back Style Seats. Front Seat Upholstery will require 2 sets of Front Seat Foams that will fit over your original seat frame and headrests.

• Front seats are the same for all models and can be purchased separately as well, you can order them separately below.
• The Full Set (Front and Rear) includes a total of 6 pieces: 2 front seat bottoms, 2 front seat backs, 1 rear seat bottom and 1 rear seat back. The Front Only set includes a total of 4 pieces: 2 front seat bottoms and 2 front seat backs.
• These Sport XR upholstery sets have Vinyl Bolsters with Premium Black Vinyl Back and Sides and Uni-Suede inserts in the bolsters. It also has Contrast Stitching throughout & the color seen behind the grommets matches the contrast stitching. The grommets are available in stainless steel, brass or satin black.
• Note that these Sport XR Seat Covers are different from the Sport X series seat covers. The Sport X series differ from the Sport XR because the X Seats do not have Uni-Suede inserts in the bolsters. These Sport XR Seat Covers have Uni-Suede inserts.
• This set of replacement seat covers does not include the plastic shell which goes on the back of the front bucket seats. That must be purchased separately.

This Hog Rings and Hog Ring Pliers Kit is for use when installing replacement seat covers.

• This set of hog rings and hog ring pliers is a kit which is used to install replacement seat covers. If you are a Do-It-Yourself enthusiast, and are replacing seat covers on your vehicle, check to see if hog rings will be required for the job.
• Approximately 100 hog rings are included along with the pliers.